2sd2696 low frequency transistor (for amplification) datasheet ll outline parameter value vmt3 v ceo 30v i c 400ma sot-723 sc-105aa ll features 1)the transistor of 400ma class which went only with 2012 size conventionally is attained in 1208 size. 2)collector saturation voltage is low. v ce(sat) Q 300mv at i c =100ma/i b =2ma ll inner circuit ll application general purpose small signal amplifier ll packaging specifications part no. package package size taping code reel size (mm) tape width (mm) basic ordering unit.(pcs) marking 2sd2696 vmt3 1212 t2l 180 8 8000 uh www.rohm.com ? 2015 rohm co., ltd. all rights reserved. 1/6 20150730 - rev.002 downloaded from: http:///
2sd2696 datasheet ll absolute maximum ratings (t a = 25c) parameter symbol values unit collector-base voltage v cbo 30 v collector-emitter voltage v ceo 30 v emitter-base voltage v ebo 6 v collector current i c 400 ma i cp *1 800 ma power dissipation p d *2 150 mw junction temperature t j 150 range of storage temperature t stg -55 to +150 ll electrical characteristics (t a = 25c) parameter symbol conditions values unit min. typ. max. collector-base breakdown voltage bv cbo i c = 10a 30 - - v collector-emitter breakdown voltage bv ceo i c = 1ma 30 - - v emitter-base breakdown voltage bv ebo i e = 10a 6 - - v collector cut-off current i cbo v cb = 30v - - 100 na emitter cut-off current i ebo v eb = 6v - - 100 na collector-emitter saturation voltage v ce(sat) i c = 100ma, i b = 2ma - 120 300 mv dc current gain h fe *3 v ce = 2v, i c = 100ma 270 - 680 - transition frequency f t *3 v ce = 2v, i e = -100ma, f = 100mhz - 400 - mhz output capacitance c ob v cb = 10v, i e = 0ma, f = 1mhz - 3.0 - pf *1 pw=10ms, single pulse. *2 each terminal mounted on a reference land. *3 pulsed www.rohm.com ? 2015 rohm co., ltd. all rights reserved. 2/6 20150730 - rev.002 downloaded from: http:///
2sd2696 datasheet ll electrical characteristic curves (t a = 25c) fig.1 ground emitter propagation characteristics fig.2 typical output characteristics fig.3 dc current gain vs. collector current (i) fig.4 dc current gain vs. collector current (ii) www.rohm.com ? 2015 rohm co., ltd. all rights reserved. 3/6 20150730 - rev.002 downloaded from: http:///
2sd2696 datasheet ll electrical characteristic curves (t a = 25c) fig.5 c ollector-emitter saturation voltage vs. collector current (i) fig.6 collector-emitter saturation voltage vs. collector current (ii) fig.7 collector-emitter saturation voltage vs. collector current (iii) fig.8 collector-emitter saturation voltage vs. collector current (iv) www.rohm.com ? 2015 rohm co., ltd. all rights reserved. 4/6 20150730 - rev.002 downloaded from: http:///
2sd2696 datasheet ll electrical characteristic curves (t a = 25c) fig. 9 gain bandwidth product vs. emitter current fig.10 emitter input capacitance vs. emitter-base voltage collector output capacitance vs. collector-base voltage www.rohm.com ? 2015 rohm co., ltd. all rights reserved. 5/6 20150730 - rev.002 downloaded from: http:///
2sd2696 datasheet ll d imensions www. rohm.com ? 2015 rohm co., ltd. all rights reserved. 6/6 20150730 - rev.002 downloaded from: http:///
downloaded from: http:///
|
